South East Queensland, PVC fencing delivered across the Ipswich growth corridor.

PVC Fencing
Collingwood Park.

4301

1980s residential suburb built over former underground coal mines, where ground stability history adds a layer to standard fence-footing decisions.

Draw your fenceCall 1300 393 748

Collingwood Park

Collingwood Park sits about 11 kilometres east of the Ipswich CBD next to the historic mining suburb of Redbank. The suburb was created in the 1970s (the name chosen deliberately to differentiate the new residential development from neighbouring Redbank's industrial-colliery associations) and housing development began around 1980 with two HIA display villages. Through the 1980s the suburb was marketed as 'the Dress Circle Suburb of Ipswich'. The geological backstory matters more here than in any other suburb in this Ipswich catalogue. Part of Collingwood Park is underlain by two decommissioned underground coal mines: the Westfalen No. 3 Colliery (operating 1965 to 1987) and the New Redbank Colliery. Two recorded subsidence events, in December 1988 and April 2008, caused surface movement and damage to houses near the intersections of Duncan, McInnerney, McLaughlin and Moloney Streets, both resulting from pillar failure inside the Westfalen No. 3 workings. The Queensland Government legislated a guarantee under section 334R of the Mineral Resources Act 1989 to repair or acquire any property in Collingwood Park existing on 25 April 2008 that is affected by mine subsidence damage.

Collingwood Park streetscape

How Collingwood Park fences.

Housing stock

Collingwood Park's housing stock is overwhelmingly 1980s and 1990s brick-veneer and brick-and-tile project housing, on lots typically 600 to 800 square metres with the slightly larger pads characteristic of HIA display-village-led subdivisions. A smaller wave of 2000s and 2010s infill housing has filled gaps and replaced acquired or demolished lots, particularly in the streets affected by the 2008 subsidence event where the Queensland Government acquired some properties under the section 334R guarantee.

Established community

The suburb is otherwise a conventional established Ipswich residential community: mature street trees, established gardens, established neighbour relationships, and a steady cycle of fence-replacement work as the original 1980s boundary fencing reaches end-of-life.

Subsidence zone

The specific Collingwood Park scenario for fence specification is the small subset of streets near the historic Westfalen workings where ground stability has been a recorded concern. On those streets the Queensland Government remediation work and ongoing monitoring data is available through the Department of Resources, and the standard fence-footing spec should be confirmed against any local subsidence indicators before excavation. For the bulk of the suburb, away from the recorded subsidence zone, fence-footing decisions follow the standard Ipswich norms.

PVC fencing considerations for Collingwood Park

Approvals & heights

Collingwood Park is within the Ipswich City Council local government area and governed by the Ipswich Plan 2024 (adopted as Ipswich City Plan 2025, effective 1 July 2025). Side and rear dividing fences up to 2 metres on a residential lot do not require planning approval. Front fences under the residential code are capped at 1.2 metres. Anything above 2 metres requires Amenity and Aesthetics approval and a building certifier under the Queensland Building Act 1975.

Mine subsidence

The unusual factor here is mine subsidence. For properties inside the recorded subsidence footprint near the historic Westfalen No. 3 Colliery, the Queensland Government section 334R guarantee remains in place for properties existing on 25 April 2008. New fence footings on those lots should be excavated with awareness of the subsurface remediation work and any ongoing monitoring indicators. The standard 600 millimetre deep, 300 millimetre wide concrete post footing is generally appropriate, but installers in the affected streets check for any visible ground-movement indicators before pouring.

Standard norms & cost-sharing

For most of Collingwood Park, fence installs proceed under the standard Ipswich norms without modification. The Neighbourhood Disputes (Dividing Fences and Trees) Act 2011 governs cost-sharing, and pool fences must meet AS 1926.1-2012.

The Collection

Five ranges, delivered to Collingwood Park.

Every PVC fencing range is available in Collingwood Park — supply only, or supply and install. Every price includes GST.

Delivery

Delivered to Collingwood Park.

We deliver PVC fencing to Collingwood Park and every other Ipswich suburb. Each order is palletised for safe transit and needs someone on site to receive it.

Estimated delivery
3-5 business days

Pricing

Pricing for Collingwood Park.

Prices are identical across every Ipswich suburb — there is no location surcharge for Collingwood Park. What you see online is what you pay, GST included.

Read the full cost guide

Questions

PVC fencing Collingwood Park, answered.

My Collingwood Park lot is near the historic mine workings. Does that affect fence footings?
For lots inside the recorded subsidence footprint near the historic Westfalen No. 3 Colliery (the streets around the Duncan, McInnerney, McLaughlin and Moloney intersection) yes, the install benefits from a brief site walkthrough before excavation. The standard 600 millimetre concrete post footing at 2.44 metre centres is generally appropriate, but the installer checks for visible ground-movement indicators (cracking in surrounding paths and slabs, recent ground heave) before pouring. The Queensland Government remediation work has stabilised the bulk of the affected ground but the section 334R guarantee remains active for properties existing on 25 April 2008. Lots outside the recorded footprint use the standard install spec without modification.
Why is PVC a smart material choice given Collingwood Park's ground history?
PVC's modular panel design is more forgiving of minor ground movement than continuous structural fencing materials. Each 2.44 metre panel is structurally independent, so small differential movement between posts is absorbed at the panel-to-post connections rather than transferring through to crack a continuous brick or masonry boundary wall. A single affected panel and post can be lifted out, the footing rectified, and the panel reinstalled, where a brick boundary wall with similar movement would need to be partly demolished and rebuilt. This is the same modular logic that makes PVC suit sloped Brisbane installs; in Collingwood Park it adds a useful flexibility against historic ground-movement risk on the affected streets.
Are there termite concerns in Collingwood Park comparable to other Ipswich suburbs?
Yes. The Ipswich regional termite pressure applies in Collingwood Park as much as in any other suburb in this catalogue, and the 1980s housing stock here has predominantly timber roof framing, timber fascia, and timber boundary fencing that all sit inside the termite ecosystem. PVC fencing removes the boundary fence from that ecosystem entirely, because there is no organic material in the panel or the post sleeve for termites to digest. For Collingwood Park owners already managing termite inspections on a 1980s brick-veneer home, eliminating one major exposed timber asset on the property line is a meaningful reduction in the exposure inventory.
Does the Queensland Government section 334R guarantee cover damage to my boundary fence?
The section 334R guarantee under the Mineral Resources Act 1989 covers repair (or acquisition at market value if repair is not cost-effective) of property in Collingwood Park existing on 25 April 2008 that is affected by mine subsidence damage. Boundary fences attached to or relevant to a covered property are generally within the scope of the guarantee on the same basis as the rest of the structure, but specific entitlements and processes are managed by the Queensland Department responsible for abandoned mine remediation. For a new fence installed today on a covered property, any subsequent subsidence-related damage to that new fence should be reported through the same departmental process. Confirm the current contact and process with the Queensland Government before relying on coverage.
Do I need an Ipswich City Council approval for a 1.8 metre PVC fence in Collingwood Park?
No, for the fence itself. The Ipswich Plan exempts residential side and rear dividing fences up to 2 metres from planning approval, and a 1.8 metre Ascot privacy panel sits comfortably inside that limit. Front fences up to 1.2 metres are also exempt under the residential code. Anything above 2 metres requires Amenity and Aesthetics approval and a building certifier under the Queensland Building Act 1975. Separately, for lots inside the recorded mine subsidence footprint, the installer's awareness of subsurface conditions before excavating post footings is a site-management practice rather than a council approval process, but it matters for the long-term performance of the fence.

Nearby

Nearby in Ipswich.

Ready when you are

Get PVC fencing in Collingwood Park.

Draw your fence on a map of your Collingwood Park property and see every panel, post, and cap priced line by line before you spend a cent.

Draw your fenceBrowse all ranges